1. Press and hold PRG using a blunt pointed object. Release PRG (Programming), after indicator light turns on.
2. Press the device button to be programmed: CATV, VCR, AUX, or TV.
3. Enter 3-digit product code.
4. Press and release the ENTER button to save the code.
5. Point remote at product and press POWER to test product operation.
2. Press the device button to be programmed: CATV, VCR, AUX, or TV.
3. Enter 3-digit product code.
4. Press and release the ENTER button to save the code.
5. Point remote at product and press POWER to test product operation.
If it
does not turn on, reprogram remote using a different code.
6. Write codes on the label inside battery compartment for future reference.
6. Write codes on the label inside battery compartment for future reference.
AUTO-FIND
If none of the codes in the code table operate your equipment, use
Auto Find to search for the proper code.
1. Turn On the device you want to operate.
2. Press and hold PRG using a blunt pointed object. Release PRG after the indicator light turns on.
3. Press the device button to be programmed: CATV, VCR, AUX, or TV.
4. Enter “000”, and then press ENTER within two seconds.
1. Turn On the device you want to operate.
2. Press and hold PRG using a blunt pointed object. Release PRG after the indicator light turns on.
3. Press the device button to be programmed: CATV, VCR, AUX, or TV.
4. Enter “000”, and then press ENTER within two seconds.
Auto Find is active when the indicator light
flashes and remains lit.
5. Point the remote at the product.
6. Press and release POWER repeatedly, about once a second, until your product turns off.
5. Point the remote at the product.
6. Press and release POWER repeatedly, about once a second, until your product turns off.
The indicator light turns off when you press POWER, and on when you
release it.
7. Press ENTER immediately to save the code.
7. Press ENTER immediately to save the code.
The indicator light flashes to
indicate the code has been saved.
8. Press POWER to turn On your product.
9. Test your product. If the remote fails to operate the functions you use most often, use Auto Find again to search for a better code. (Auto Find resumes search after the last code that was entered and saved in step 7).
8. Press POWER to turn On your product.
9. Test your product. If the remote fails to operate the functions you use most often, use Auto Find again to search for a better code. (Auto Find resumes search after the last code that was entered and saved in step 7).
[If the indicator light stays on as you press
POWER, Auto Find has tried all of the codes.
If the product you want to control has not turned off, your remote will
not work with that product. To cancel Auto Find, press PRG at any time during
Auto Find.
VOLUME OVERRIDE
These remotes can override TV, VCR, or Video Disk Player volume functions with an amplifier’s volume and muting.
1. Program the amplifier normally.
2. After programming the amplifier, Press and hold PRG again using a blunt pointed object. Release PRG after indicator light turns on.
3. Press and release the device button whose volume control is to be replaced by the amplifier volume control. For example, pressing TV will operate the amplifier’s volume while the remote is in TV mode.
4. This time, enter the special code 4-9-9 instead of the product code.
5. Press and release ENTER to save.
These remotes can override TV, VCR, or Video Disk Player volume functions with an amplifier’s volume and muting.
1. Program the amplifier normally.
2. After programming the amplifier, Press and hold PRG again using a blunt pointed object. Release PRG after indicator light turns on.
3. Press and release the device button whose volume control is to be replaced by the amplifier volume control. For example, pressing TV will operate the amplifier’s volume while the remote is in TV mode.
4. This time, enter the special code 4-9-9 instead of the product code.
5. Press and release ENTER to save.
CABLE BOX
These remotes can control cable/converter box volume and muting if
available on your equipment.
1. Program the cable/converter box normally.
2. After programming the cable/converter box, Press and hold PRG again using a blunt pointed object. Release PRG after indicator light turns on.
3. Press and release the cable device button.
4. This time, enter the special code 3-9-9 instead of the product code.
5. Press and release ENTER to save.
1. Program the cable/converter box normally.
2. After programming the cable/converter box, Press and hold PRG again using a blunt pointed object. Release PRG after indicator light turns on.
3. Press and release the cable device button.
4. This time, enter the special code 3-9-9 instead of the product code.
5. Press and release ENTER to save.
SPECIAL FEATURES
AUX+1, AUX+2, AND AUX+3 Capability These remotes can control up to
seven devices. If the remote has been programmed for four components using the TV, VCR, CABLE and AUX keys, you may also program it for up to three
additional using AUX+1, AUX+2 and AUX+3.
To Program AUX+1, AUX+2, AND AUX+3
1. Locate three-digit code for product in code table.
2. Press and hold PRG until indicator lights up.
3. Press AUX and “1” simultaneously to select AUX+1.
4. Enter three-digit code, and then press ENTER. Indicator light should flash, and then turn off to indicate code is accepted. If the light stays on, repeat steps 3 and 4
or try a different code.
5. Repeat steps 2-4 for AUX+2 and AUX+3.
6. Write codes on the label inside battery compartment for future reference. Hold down AUX and press 1, 2, or 3 to access AUX+1. +2 or +3 mode.
To Program AUX+1, AUX+2, AND AUX+3
1. Locate three-digit code for product in code table.
2. Press and hold PRG until indicator lights up.
3. Press AUX and “1” simultaneously to select AUX+1.
4. Enter three-digit code, and then press ENTER. Indicator light should flash, and then turn off to indicate code is accepted. If the light stays on, repeat steps 3 and 4
or try a different code.
5. Repeat steps 2-4 for AUX+2 and AUX+3.
6. Write codes on the label inside battery compartment for future reference. Hold down AUX and press 1, 2, or 3 to access AUX+1. +2 or +3 mode.
SET-UP CODE LIST
CLICK ON THE CODE LIST TO MAGNIFY