FUNAI - LC5 D20BB _ LCD TV _ SERVICE MODE_INITIALIZE_FLICKER ADJUSTMENT - PROCEEDINGS

TO ENTER AND EXIT SERVICE MODE

1. Turn the power on. (Use main power on the TV unit.)
2. Press [STANDBY-ON], [2], [7], [1], and [MUTE] buttons on the remote control unit in that order within 5 seconds.
3. To cancel the service mode, press [STANDBY-ON] button on the remote control.

TO INITIALIZE THE TV

• Turn the power on.
• To enter the service mode, press [STANDBY-ON], [2], [7], [1], and [MUTE] buttons on the remote control unit in that order within 5 seconds.
• To Exit the service mode, press [STANDBY-ON] button on the remote control.
• Press [DISPLAY] button on the remote control unit to initialize the LCD television.
• Confirm "FF" indication on the upper right of the screen.

FLICKER ADJUSTMENT

• Enter the Service mode.
• Press [2] button on the remote control unit.
• Press [UP / DN] buttons on the remote control unit so that flash stops.

For more Funai Tvs service assistance, check this.